Straight Anatomic Abutments

Product Specification:Abutments

• For implants with diameters of: 3.3, 3.8 and 4.2mm
• For implants with diameters of: 5 and 6mm

Implant Description

• Our Straight Titanium Abutments are connected to the implant through a hex connection. 
• The neck of the mount is 1.3mm wide and has a converging body with a beveled incline.  Opposite this is a vertical slot which is parallel to the hexagon faces.
• A 2.5mm high hexagon inside the abutment is used to insert the implant driver and the abutment.
• A peripheral locking slot is located 1mm below the abutment bevel.  A 1.72" thread titanium fastener goes through the abutment.  In addition, internal tapping is used to prevent the screw from falling inside the abutment.

Advantages of Straight Titanium Abutments

• They can be used with two platforms; normal and narrow.
• The bevel area and the counter slot design prevent superstructure rotation and ensure tight contact and swift healing of the abutment.
• Peripheral tightening, along with the ring section of the abutment, enables simple and precise insertion and mounting.  Clinicians can attach a coping or temporary reconstruction to the abutment.
• The internal hexagon leads to the implant installation area and uses a driver that fastens to the implant after the abutment's removal.  This is undertaken using either a manual driver or a driver that is connected to hand unit.
• Internal tapping configuration prevents the fastening screw's disengagement from the implant.
• The abutment serves as a channel that prevents contact and friction between inserted pieces and the internal hexagonal of the implant.

• Product Specification: Aesthetical Direct Abutment

This product is similar to the Straight Titanium Abutment with the following additional elements:

• The anatomically configured abutment neck has ascending and descending

shoulders.

• The height of the neck varies between 1 to 4 mm and is available in four different sizes.
• There is the option of different peripheral contact rings being provided in the upper third of the abutment.  This tightens the superstructure to prostheses such as

copings, healing caps or temporary coronas.

• Abutments come in 15 and 25° angle configurations.

• Product Specification: Angular Abutments

Top Implants' angular abutments are made from titanium and are available in two sizes:

• For implants with diameters of: 3.3, 3.8 and 4.2mm
• For implants with diameters of: 5 and 6mm

Implant Description

• The abutment neck has an anatomic configuration with ascending and descending shoulders.
• The height of the neck varies between 1 and 4mm and is available in four different heights. The body converges at an angle of 15 or 25° with an option of peripheral ring for fixing prosthetic superstructure members.
• The driver of the tightening screw starts above the anatomical shoulder of the abutment wall.
• A short-head tightening screw with the added benefit of internal tapping is used to prevent the screw from falling inside the abutment.